Having a pool at home is quite fun to have. However, it is not always fun and enjoyable because at the end of it all you need to clean up your pool when you are done using it, and it could get quite difficult. If you are already tired when hearing about a clean-up, imagine if you just let your pool stay still without cleaning up waiting for the next summer. When you went to check, you see the growth of mosses and a whole bunch of dirt, grime, twigs, and leaves. Of course, you could drain it, so learning how to drain the last bit of water from the pool is an important thing to know.
Why Do You Need to Drain Your Pool?
Using pools are not as easy as it seems. You do not just put the water in it. Use it for a while and leave it hanging for a year, then use it again. You need to be aware that using it that way would cause your skin irritations and other possible harm to your body, and there is also the overabundance of Total Dissolved Solids that would deem your pool not fit for use. Draining is a means to remove and replace the used water from the pool, but it is usually not done so, especially if you are following the proper maintenance of the pool and clean it often.
Another reason for draining would be because of Cyanuric acid or the increase of CyA levels, which may build up in the water. This time addition of cleaning chemicals and normal cleaning tools would not help. Only, the drainage of water and the use of a fresh one would dilute the remaining CyA in the water for safer use of your pool. Draining your pool could also be because of trying to fix damages from the pool, which will require drainage. With that said, learning how to drain the last bit of water from the pool is too important to overlook and might even save you the trouble every time you encounter such problems that need draining.
How to Properly Drain the Last Bit of Water from the Pool
In how to drain the last bit of water from the inground pool, it is important to keep in mind that doing it in the fastest and most efficient way is your goal. With this, using an electric pool pump would be the best to drain the water initially. The first is to place an intake hose of the pump into the water and close to the pool’s center. Then you should place the outlet hose of the pump somewhere away from the pool with this make sure to choose level ground; otherwise, pumping may occur. After this, you could turn the pool pump on. Check on the water level decrease until you proceed to the next step.
If you are done using the pump, and there is still water left, it is time to use a wet vacuum to suck the stagnant water and remove it bit by bit. You could also sweep the liquid down the drain if possible or remove the pool liner and flip it to remove excess water. After you have done all of this, the only thing left to do is clean the pool thoroughly and make sure it is cleaned up well before filling it up again for use.
Key Reminders in Removing Water from the Pool
Learning how to drain the last bit of water from the pool is not the end of the things you should remember. There are key reminders you should keep in mind when you are doing such procedures to your pool. First of all, it is your safety. You should always keep yourself safe when cleaning and draining your pool. For your pump, you should make sure that its power source and cord are at an elevated angle where it is safe. Also, a footwear that will prevent you from slipping would be a great precautionary measure to have.
On the other hand, when it comes to your pool, there are things you should also remember to consider. The first one is the loss of your pool’s shape, which mostly applies to above ground pools. When draining, you are removing water from the pool that might cause deformation because water helps hold the shape of the pool. The next thing to remember is the growth of molds, which is naturally observed in untreated pools. You should make sure to take steps to prevent further growth of molds on the liner when you are finished draining. These usually grow when the liner is stored without being dried. Lastly, sun damage is an important consideration because the liner becomes damaged with the sun’s UV rays. If you are draining your water, make sure you do it fast, and without the sun glaring on you, it is best done early morning.
These things are important considerations that could help you properly store and maintain your next use pool. Get more tips on pools.
Learning how to drain the last bit of water from the pool could help you, especially when you are trying to set up your pool with the fastest time as possible. It is stated that maintaining your pool and having it regularly cleaned would make it easier to make things ready for your summer cooling session, so it should also be noted to not proceed with the more drastic method of draining all of the water is unusable. Not only does it waste lots of water, but it also spills your dirty water from around you, which could also make a mess.
Do not let your pool become too dirty for you to use because you and your family would use it again soon. Why be lazy about cleaning and maintaining it? Draining is a tedious task, and quite a time and energy-consuming. If you do not want to undergo such an ordeal of cleaning up, then you should do whatever it takes to not result in this last resort method to make your pool usable again.