Every mom-to-be still wants to look classy and stylish during pregnancy, but maternity dresses are sometimes quite boring and dull. Creating a DIY maternity dress seems a tad task to do, but you are wrong. Your simple sewing expertise is more than enough to keep your maternity dress stylish and elegant. For moms-to-be out there, it is beneficial to learn how to make a simple maternity dress.
A DIY maternity dress is good for you because you can easily fit yourself with your final output by doing all the necessary measurements. Not only do you save money, but it also enhances your sewing skills for future purposes. In this article, we’ll teach you the basics of how to make a simple maternity dress. Read on.
Steps on How to Make a Simple Maternity Dress
You might think that learning how to make a simple maternity dress is hard, but it’s all worth it if you only know the basics. Please note that this maternity dress is simple and easy to make and is highly recommended for beginners out there. Below are the easy and useful steps on how to make a simple maternity dress and the materials needed.
Things you’ll need:
- Scissors
- Tape Measure
- Pins
- Tailor’s Chalk
- Ruler
- Thread
- Ballpoint Needles
- Sewing Machine
- Tulle Fabric
Step 1
If you want to learn how to make a simple maternity dress, you will need to take numerous measurements to ensure that your maternity dress is perfectly fitted. In doing so, measure around your chest, divide this number by two and an additional one centimeter. This will be your width measurement.
After that, measure the top of your shoulder down to the top of your bump then add one centimeter for added clearance. This will be your curve measurement.
Finally, measure the top of your shoulders and where you want your dress to finish. After measuring the desired length, add around 1.5 to 2centimeters. This will be your length measurement.
Step 2
Cut your pattern. To have a more appropriate feel, place your fabric in a downward position to stretch from side to side. With your tailor’s chalk, draw a rectangle that is the same as your width measurement. Draw another one for your length measurement.
You will need to add some more space for your baby bump. In doing so, start from the upper part of your rectangle, spot your curve measurement at each side of the rectangle.
From the spots you just marked, gradually bend out the shape by around 6cm to 8cm, so you have a rectangle with a somewhat broader bottom than the top. This will give you plenty of space for your bump to breathe peacefully. Slash out this shape and replicate it for you to have two pieces.
Step 3
Now we go to the meticulous part, sewing! In doing so, arrange both right sides together; this should match both raw edges.
Measure around 20 centimeters from the shoulder, then put a pin there. Continue the pinning through the side of the dress. When you reach around 15 cm from the bottom of the dress, stop pinning, then replicate on the other side. Sew using the zigzag method to be more sturdy. Always use a seam allowance of 1 centimeter.
Step 4
Once both sides are sewn already, we will now cut the curve for your neck. In doing so, the easiest way to do this is through a comfortable dress you like wherein the neck isn’t too constricting. Trace along the edge and use the tailor’s chalk for tracing. After tracing, slowly cut the curve and make sure that you try to see if the neck fits perfectly once you are done cutting.
Step 5
Shape and form the bottom of your dress by cutting in a curve way right through the center. Do this on the other side as well. Also, repeat it from the backside too.
Step 6
On the wrong side of the dress facing up, fold the bottom of the dress around an inch or inch and a half. Repeat these steps along the hem of the dress. You may want to clip the curves out to have a straight finish. Sew by using the straight stitch method and a seam allowance of around .75 to 1cm.
Step 7
With the excess fabric, we’ll cut down a neckband for your neckline section in your dress. With the excess fabric you have, cut down the curve similar to your traced neckline. Or you can get your comfortable dress and track the curve line. After that, cut with the use of scissors along the lines.
Step 8
When the neckband is already cut, sew the neckband onto the dress’ neckline. Be sure to sew it using the zigzag method along the raw edges. Cut any excess thread and fabrics. Always match the shoulder seams of the dress to the seams of the neckband.
Step 9
Topstitch through the edges of the neckband to finish. Keep any excess fabrics and materials that were used for future use! And that’s how to make a simple maternity dress!
Relax and Enjoy your Homemade Maternity dress! You are all done—no more hiccups. Be sure to keep sharp objects away to avoid any sudden accidents. Keep your new maternity dress nice and clean. Making your maternity dress is a breeze. Although it isn’t made by a professional, it is more than enough, especially if you made it yourself.
Conclusion
For expecting moms, you really can’t help but stay in your house and do chores that aren’t labor-intensive. One good way to kill time and boredom is to make maternity dresses. That’s why for moms-to-be, the simple and easy steps on how to make a simple maternity dress is more than willing to help you out in making one.
Lastly, the journey of pregnancy should be a breeze if everyone helps you in so many ways. Sewing helps to keep pregnancy anxiety and stress away. Keep practicing, and you’ll master sewing eventually. Find out more about maternity clothes.